The Chemistry Solutions Company
Did you know that water can sometimes contain harmful contaminants that aren't detectable by taste or smell?
Test your water today !
Key Benefits of using our kits
Our testing kit provides precise results, ensuring you have an accurate understanding of your water quality.
Simple instructions make testing your water a breeze, with results available in minutes.
Avoid expensive laboratory testing fees with our affordable at-home solution.
Detect a wide range of contaminants, including heavy metals, bacteria, pesticides, and more.
Take control of your water quality and make informed decisions about filtration and purification.
Find hiding contaminants in water wether its from a borehole, river, tap or rain.
Do you need more information?
No problem! Ask us anything
You can buy a kit on our website. Click the I want to buy a kit.
It is a one time use kit.
Aluminum: 0-250m g/L
Ammonia nitrogen: 0-500 mg/L
Carbonate Root: 0-180mg/L
Chromium/Cr(VI): 0-100 mg /L
Copper: 0-300mg/L
Cyanuric Acidiron: 0-300m g/L
E.coli
Fluoride: 0-200 mg/L
Free Bromine: 0-20mg/L
Hardness: 0-1000mg/L
Iron: 0-500mg/L
Lead: 0-500 mg /L
Manganese: 0-5mg/L
Mercury: 0-0.08mg/L
Nitrate: 0-500 mg/L
Nitrite: 0-80mg/L
pH: 6.2-8.4
Phosphate: 0-500mg/L
Potassium: 0-240 mg/L
Residual Chlorine: 0-20mg/L
Salt: 1500-5000 ppm
Sulfate: 0-1600mg/L
Total Alkalinity: 0-240mg/L
Total Chlorine: 0-10mg/L
Zinc: 0-100mg/L
Only R399
The Chemistry Solutions Company is owned by Lesley Mukwada
Yes, we deliver across the world. Our shipping partners are The Courier Guy, DHL and Fedex.
Yes. If you are buying over 100 test kits we do offer special discounts.
Yes, through our Water Warrior Project. Some of the profits of the kits a used to provide free water testing to vulnerable communities.
Yes. We would like for you to nominate communities that could benefit from the Water Warrior Project
How to test water?
Test Strips
Deep a test strip into your water sample for 2 seconds. Blotside of test strip on absorbent tissue/ paper to get rid of excess water. After 30 second compare test strip to colour chart. For best results read innatural daylight.
1
E.coli Test
1 Wash your hands thoroughly. 2 Flush the tap water being tested for 3-5 minutes (if applicable) 3 Remove the cap - without touching the inside of bottle. 4 Fill the bottle with cold water to the fill line. 5 Screw the cap on tightly, and shake the bottle until the powder dissolves (roughly 20 seconds). 6 Place the test out of direct sunlight, in a room between 20°C-32.2°C 7 Wait 48 hours to compare your results.
2
Phosphorus and Ammonia tests
Instruction for phosphorus 1.Collect 2ml sample water, then drip 1-2 drops of phosphorus coloring solution into the tube and Shake it well. 2.Read the color with color chart after 1 minute. Instruction for Ammonia nitrogen: 1.Drip 2ml of activator solution into a empty tube then drip 1-2 drops of sample water, shake it well. Wait 2 minute. 2.Drip 1-2 drops of Ammonia nitrogen coloring solution into the tube and shake it well. 3.Read the color with color chart after 10 minute.
3
