W16 Test Strip
https://www.takealot.com/16-in-1-full-panel-strips-for-water-quality-testing/PLID71716353
The bottle of 100 strips provides a comprehensive panel of parameters for testing water as follows
Specifications:
– pH (6.2-8.4)
– Total Alkalinity (0-240 mg/L)
– Residual Chlorine (1-20 mg/L)
– Total Chlorine (0-10 mg/L)
– Nitrate (0-500 mg/L)
– Nitrite (0-80 mg/L)
– Mercury (0-0.08 mg/L)
– Lead (0 – 500 mg/L)
– Iron (0-500 mg/L)
– Copper (0-300 mg/L)
– Fluoride (0 – 200 mg/L))
– Bromine (0 – 20 mg/L)
– Chromium /Cr ( 2 – 100 mg/L)
– Hardness (0 – 425 mg/L)
– Carbonate Root (0-180 mg/L)
– Sulfate (0-1600 mg/L)
Usage:
– Water test strips are made for water quality testing of both qualitative and semi-qualitative.
– It can test a total of 16 parameters in water: pH, Total alkalinity, Free Chlorine, Total Chlorine, Nitrate, Nitrite, Mercury, Lead, Iron, Copper, Fluoride, Bromine, Chromium, Hardness, Carbonate Root, and Sulfate.
– The results on the strips can be read visually or instrumentally.
– Tests can be performed with Drinking Water, Pool, Spa, Ponds, Aquarium, and Industrial Waste Water.
Testing conditions and ranges:
– Test your sample at an ambient temperature between 2 ºC – 30 ºC, and relative humidity of less than 80.
Instructions:
– Collect water sample to be tested in a vial, cup, or container
– Immerse the test strip in the desired water sample and remove within 5 seconds
– Hold the strip horizontally and gently tap or shake to remove excess water. Take extra precaution to ensure that the water from test pads don’t bleed into each other
– Read the test results carefully within 60 seconds in a good light and with the test area held near the colour chart on the bottle label. Changes in colour that appear along the edges of the test pads or after more than 2 minutes have passed are of no significance.
What’s in the box
– 1 x 100 Reagent Strips
SJ Waves 16-in-1 Water Test Kit
https://www.takealot.com/sj-wave-16-in-1-water-test-kit/PLID71501433
Water dissolves many minerals, chemicals, and foreign substances, hen, it can get contaminated.
Contaminated drinking water can carry bacteria that can harm our bodies and make us ill. Our 16 in 1 water test kit is the perfect solution for a complete water ‘check-up’ before consumption, keeping you and your family safe.
It is easy to use, provides quick and accurate results in 1 minute.
Our water testing strip tests, detects, and provides comprehensive and accurate results for the following 16 parameters:
– Total Hardness: 0 – 425PPM
– Free Chlorine: 0 – 10PPM
– Iron: 0 – 500PPM
– Copper: 0 – 10PPM
– Lead: 0 – 500PPM
– Nitrate: 0 – 500PPM
– Nitrite: 0 – 80PPM
– MPS: 0 – 20PPM
– Total Chlorine: 0 – 10PPM
– Fluoride: 0 – 100PPM
– Cyanuric Acid: 0 – 250PPM
– Ammonia Chloride: 0 – 500PPM
– Bromine: 0 – 20PPM
– Total Alkalinity: 0 – 240PPM
– Carbonate: 0 – 240PPM
– pH: 6-9
Complete water test kit:
– Everything you need to test your water; tests for 16 parameters, ensures lead-Free and pH safe drinking water; testing tube and dropper included in every kit for easy sample collection
Separate package:
– 100 testing strips packed in 10 sealable bags with the dry agents to ensure long shelf life and reliable results. Strips in an open package need to be used within 90 days while an unopened package can last up to two years. You don’t need to rush using all 100 strips within 90 days because we bag our strips separately.
Multiple uses:
– Test every water sour around your home, including drinking, well and tap water, pool & spa, hot tub, and aquarium
Reliable and fast results:
– for proven, reliable, and quick results in 2 minutes – easy to use and great for school projects.
Enjoy the pea of mind – Detects low levels of impurities and foreign substances and keeps your family safe.
