The Ultimate Water Test kit

Water dissolves many minerals, chemicals, and foreign substances, then, it can get contaminated. Contaminated drinking water can carry bacteria that can harm our bodies and make us ill. Our 21 in 1 Water Test Strips & 2 E.coli Tests Kit & 7 in 1 Water Quality Testing Meter is the perfect solution for a complete water ‘check-up’ before consumption, keeping you and your family safe.

It is easy to use, provides quick and accurate results in 1 minute.

The Chemistry Solutions Company 21 in 1 Water Test Strips & 2 E.coli Tests Kit & 7 in 1 Water Quality Testing Meter consists of 200 test strips provides a comprehensive panel of parameters for testing water as follows:

21 in 1 Water Test Strips & 2 E.coli Tests:

11 in strips (100 strips):
Nitrate (0-500 mg/L)
Nitrite (0-80 mg/L)
Bromine (0 – 20 mg/L)
Total Chlorine (0-10 mg/L)
Residual Chlorine (1-20 mg/L)
Fluoride (0 – 200 mg/L))
Potassium (0-50 mg/L)
Sulfate (0-1600 mg/L)
Hardness (0 – 1000 mg/L)
pH (6.2-8.4)
Total Alkalinity (0-240 mg/L)

10 in 1 strips (100 strips):

Carbonate Root (0-180 mg/L)
Zinc (0-100 mg/L)
Aluminium (0-250 mg/L)
Chromium /Cr ( 0 – 100 mg/L)
Copper (0-300 mg/L)
Cyanuric acid (0-300 mg/L)
Iron (0-500 mg/L)
Lead (0 – 500 mg/L)
Manganese (0-5 mg/L)
Mercury (0-0.08 mg/L)

Usage:
– The Chemistry Solutions Company 21 in 1 Water Test Strip & 2 E.coli Tests are made for water quality testing of both qualitative and semi-quantitative.
– It can test a total of 22 parameters in water.
– The results on the strips can be read visually or instrumentally.
– Tests can be performed with Aquarium, Aquaculture, Domestic, Drinking, Environmental, Farming, Industrial, Laboratory, Ocean, Pool, Spa, Ponds, Aquarium, and Industrial Waste Water.

Testing conditions and ranges:
– Test your sample at an ambient temperature between 2 ºC – 30 ºC, and relative humidity of less than 80.

Instructions:
– Collect water sample to be tested in a vial, cup, or container
– Immerse the test strip in the desired water sample and remove within 5 seconds
– Hold the strip horizontally and gently tap or shake to remove excess water. Take extra precaution to ensure that the water from test pads don’t bleed into each other
– Read the test results carefully within 60 seconds in a good light and with the test area held near the colour chart on the bottle label. Changes in a colour that appear along the edges of the test pads or after more than 2 minutes have passed are of no significance.

Qualitative bacteria test (including E.coli)(x2):

Instructions:
1. Wash your hands thoroughly.
2. Flush tap water being test for 3-5 minutes (if applicable).
3. Remove cap without touching the inside of the bottle.
4. Fill the bottle with cold water to the line.
5. Screw the cap on tightly, and shake the bottle until the powder dissolves (roughly 20 seconds).
6. Place the test out of direct sunlight, in a room between 20 ºC – 32.2 ºC.
7. Wait 48 hours to compare your results.

7 in 1 Water Testing meter:

7 different parameters: salinity, pH, Temperature (°F and °C), TDS (EC, CF, ppm)
Built-in Rechargeable Battery
Large, Tri-Screen LCD Display; 3 results displayed simultaneously
High pH accuracy up to ±0.1pH

Electrodes and Probe:
-Instantaneous reading results
-Option for mounting or hanging
-Quick and easy Installation
-Easy calibration of pH and TDS with just a mini-screwdriver (detailed procedure is in manual)
-Reliable and stable and transportable
-The operation is simple and comfortable
-detachable BNC composite
-plastic-coated for enhanced protection
-pre-calibrated (factory calibrated)

Limits:
EC: 0-10 000 us/cm; 10.01 – 19.99 ms/cm; 20.1-400 ms/cm
Salinity: 0 – 10 000 ppm; 10.1 – 200 ppt; 0.00 – 25.00%
TDS: 0 – 10 000 ppm; 10.1 – 200 ppt
Temperature: 0.1 – 60 ºC; 32.0 – 140 ºC
pH: 0 – 14
ORP: 0 – 999 mV
Specific gravity (S.G.): 1.000 – 1.222

What’s in the box
1 x 21 in 1 Water Test Strips & 2 E.coli Tests & 7 in 1 Water Quality Testing Meter